FEELER GAGES / THICKNESS GAGES / SHIM STOCKS
h+s from GERMANY Tolerance T3
ดาวน์โหลดตารางราคาแผ่นชิม
h+s your partner for precision
h+s offers an extensive range of precision feeler gages and shim steel which covers all products and application needs. All products can be supplied quickly and reliably from our large stock, small quantities as well as bulk quantities. For products not shown in our range please contact our special order service. Laser cut shims can be manufactured according to your drawings or CAD-files in all available thickness between 0.01 and 4.00 mm.
Rolled to precise thickness tolerances
The thickness tolerance of h+s precision shim foil meets the international Standard T3(Stainless steel with width 12.7 mm and 600 mm according to DIN EN 10 258).
These tolerances are even closer than required by DIN 1544 / DIN EN 10 140. The technical information table on page 10 gives
information on absolute permissible deviation on thickness.
High tensile strength due to high quality alloys
Our precision products are manufactured of High Carbon Steels 1.1274(1095) and 1.2003 (1075). Stainless steels 1.4034 (420) and 1.4310 (AISI 301)
as well as Brass 2.0321 (UNS 27 200). These alloys were carefully selected to obtain a high tensile strength.
More than 500 products available from stock
A close contact to our customers gives us an insight into their needs. As a result we stock now many non-standard thickness between 0.10 and 0.30 mm in stainless steel AISI 301. We also offer hardened stainless steel 1.4034 in thicknesses between 1.00 and 3.00 mm. h+s supplies more than 60 different thicknesses from 0.003 mm (0.00012”) and 4.0 mm (0.157”) in the following manner:
• Up to 0.06 mm in steps of 0.005 mm
• Up to 0.30 mm in steps of 0.01 mm
• Up to 1.00 mm in steps of 0.05 mm
• Up to 2.00 mm in steps of 0.10 mm
• Additionally 2.50, 3.00 and 4.00 mm(3.50 mm upon request)
Quality inspection
• During manufacturing continuous inspection ensures our close tolerances are met all times.
• Products information and
product batch are marked on the h+s label. The marerial can be traced back to the cast. In addition to that most strips are marked with thickness and production batch.
Individual sizes according to your needs
We can supply you with strips and flat sheets in all widths up to 300 mm (partly up to 600 mm) in carbon steel, stainless steels and brass. Should you require a product not shown in range please contact our special order service. With our expertise we can meet your special requirements for non-standard products.
Laser cut parts made from precision shim foils
h+s offers a service to supply products manufactured from precision foil. Laser cut parts can be manufactured to your drawings or CAD files. Parts can be supplied in all alloys from 0.01 to 5.00 mm.
Competitive prices for precision high quality products
Compare our products! h+s precision foils offer a good value at high quality and precision. Please ask for availability and price if you need a larger amount in one size.
วัตถุดิบ (Materials)
1. Hardened and Tempered High Carbon Steel 1.1274
เทียบเท่า DIN Ck101
AISI 1095
ASTM G10950
JIS S95C
- เหล็กกล้าคาร์บอนสูงถึง 1%, ชุบแข็ง
- เหมาะสำหรับทำเกจ, แผ่นชิมและสปริง
- Tensile Strength สูง
- สามารถใช้แม่เหล็กดูดได้
- ผิวขัดเงาขาว (White Polished)
2. Tempered and Rolled Stainless Steel 1.4310
เทียบเท่า DIN X12 Cr Ni 17 7
AISI 301
ASTM S30100
JIS SUS301
- เหล็กสเตนเลสทนการกัดกร่อนได้ดีเพราะมีโครเมียม 17% นิเกิ้ล 7%
- Tensile Strength สูง
- มีคุณสมบัติเป็นแม่เหล็กต่ำ จึงใช้แม่เหล็กดูดได้ยาก
- ผิวสว่างใส (Bright)
3. Tempered and Rolled Brass 2.0321(ทองเหลือง) NEW!!!
เทียบเท่า DIN Cu Zn 37
ASTM C27200
- ประกอบด้วย ทองแดง 63% สังกะสี 37% ไม่เป็นแม่เหล็ก, ตัดตามขนาดได้ง่าย
- สามารถตัดหรือปั๊มเพื่อทำงานต้นแบบ (PROTOTYPE)
- สำหรับหนุนรองชิ้นงาน (Shim), ทำประเก็น(GASKET)
- เช็คค่า Clearance ของแม่พิมพ์, วาล์ว, ลูกสูบ, หัวเทียน
- เช็คค่าความฟิตของร่องแท่นเครื่องและซ่อมแซมร่องที่สึกทำ JIG และ TOOL
- แผ่นชิม STAINLESS ไม่เป็นสนิม จึงเหมาะสำหรับอุตสาหกรรมอาหาร, ยา และอิเล็คโทรนิคส์