XT500 LARGE DIAMETER 3-POINT BORE GAUGE
ไมโครมิเตอร์วัดรูในดิจิตอลสำหรับรูใหญ่
The Bowers XT500 large diameter 3-point bore-gauge has been designed specifically for the measurement
of internal diameters between 300 and 500mm. The newly designed constant-force digital readout ensures
that the measuring pressure remains constant throughout the measurement whilst radiussed measuring anvils
provide optimum centralization in the part. Anvil sets are supplied in 25mm steps (300-325, 325-350 etc) and
each set has been manufactured to the exact toleranced size. The 300-325 mm anvils are the master
reference set and are used for setting the gauge in the setting ring. The other anvil sets are then fitted as
required without further re-setting. This means that only one 300 mm setting ring is required to set the gauge
for all diameters in the full 300-500 mm range of the instrument.
Features
- Measuring range: 300-500 mm
- New constant-force digital readout
- Single 300mm setting ring covers full range
- Radiussed anvils of tool-steel for optimum centering
- Accuracy: 15 μm
- Repeatability: 3 μm
- IP65 electronics
- RS232/ USB out put
- Resolution 0.01/0.001 mm. Metric/inch switchable
- Fast accurate measurement
- Extensions available for deeper bores
- UKAS certificate with setting ring
- Certificate of conformity with bore gauge
- Supplied in fitted case
- ไมโครวัดรูในดิจิตอลแบบ 3 ขา สำหรับเส้นผ่าศูนย์กลางในช่วง 300-500 มม.โดยเฉพาะ
- ออกแบบใหม่ให้มีแรงกดวัดคงที่ (Constant force Measurement) เพื่อความเที่ยงตรง
- Anvil ปลายโค้งมน (R) เพื่อให้เข้าหาศูนย์กลางชิ้นงานได้ดียิ่งขึ้น
- ขนาดเริ่มต้นที่ชุด Master 300-325 มม. แล้ว
เปลี่ยนAnvil เพื่อเพิ่มขนาดโดยAnvil เพิ่มขึ้น
step ละ 25 มม. (300-325,325-350 .......)
และ Anvil แต่ละชุด จัดสร้างตามพิกัดเฉพาะของ
แต่ละขนาด
- สามารถใช้Setting Ring (Ring Gauge )
ขนาด 300 มม. เพียงชิ้นเดียวตั้งค่าชุด
Master (300-325 มม.) ก็เพียงพอแล้ว
เมื่อเปลี่ยน Anvil เพื่อเพิ่มขนาดก็ไม่ต้อง
ตั้งค่าใหม่อีกตลอดช่วงการวัด 300-500 มม.
ช่วยให้ประหยัดเวลา และค่าใช้จ่ายลงได้มาก
- หน่วยแสดงผลดิจิตอล IP65, RS232/ USB
output, Accuracy 15um,
Repeatability 3um,
ความละเอียด 0.001มม
(0.00005”)
- ฟรี ! Setting Ring 300 มม+ UKAS certificate,
certificate ของหัววัดและกล่องบรรจุ
- Option ก้านต่อสำหรับวัดรูลึกสูงสุด 2.5 เมตร
ชุดเดี่ยว มาพร้อมหน่วยแสดงผลดิจิตอล, หัววัดพร้อม Anvil แบบถอดเปลี่ยนได้,Setting Ring + UKAS certificate + กล่องบรรจุ
ชุดใหญ่ มาพร้อมหน่วยแสดงผล, หัววัดพร้อม Avil แบบถอดเปลี่ยนได้ ขนาดตามRange, Setting Ring + UKAS certificate + กล่องบรรจุ
รายละเอียดสินค้าเพิ่มเติม
หมายเหตุ : หากลูกค้าสนใจสินค้ารายการนี้สามารถติดต่อฝ่ายขายเพื่อเสนอราคา